WEICON Ceramic BL is filled with silicon carbide and
zirconium silicate, offers high chemical and temperature
resistance as well as extreme wear protection and high
abrasion resistance. The epoxy resin system is especially
suited for the lining of heavily stressed pump housings, as
wear protection for slide bearings, slides, funnels and pipes
and for the repair of castings, valves and blower fans.
A coating with WEICON Ceramic BL, which gives surfaces a
very smooth finish, increases the flow speed of liquids and
thus increases the efficiency of pumps, pipes, valves, etc. by
5 % to 20 %.
The product can be used in mechanical and plant engineering,
in apparatus engineering and in many other areas of industry.
Wear-resistant final coating for all Plastic Metal types.
WEICON Ceramic BL is suitable in combination with one of
the other WEICON Plastic Metal types for a system build-up
as a surface finish for visual inspection.
Application
For processing, we recommend an ambient temperature of
20°C (68 °F) at less than 85% relative humidity. The highest
adhesive strength is achieved when the parts to be processed
are heated to >35°C (>95°F) before application. For a thin
pre-coat, work WEICON Ceramic BL thoroughly into the
surface in crosswise layers using a paint brush to achieve
maximum adhesion. By means of this technique, the epoxy
resin penetrates well into all cracks and roughness depths.
Afterwards, a second application with a paint brush or foam
roller can be carried out straight away, until the desired layer
thickness is reached. A layer of approx. 0.25 to 0.50 mm can
be achieved per work step. Make sure that the epoxy resin is
applied evenly and without air bubbles. Further coats can be
applied in each case after approx. 5 hours (layer sequence
time).
Reviews
There are no reviews yet.