DESCRIPTION
PATTEX PL200
Pattex PL200 construction adhesive is the flexible
way to seal and bond. It is a professional
polymer-based construction adhesive with high
immediate tack that instantly bonds, fixes and
seals a wide variety of building materials inside and
outside buildings (up to 50kg/m2
CHARACTERISTICS
• For interior and exterior applications
• Transparent
• For all materials and substrates*
• Polymer based
• Water-resistant
• Seal & bond
SCOPE OF USE
PL 200 transparent is multiple-substrate compatible
including Brick, Ceramic, Concrete, Hardboard,
Plasterboard, Plywood, Stone, MDF, Wood, Metal,
UPVC, Glass, Plastics*, painted surfaces*, Mirrors**.
All absorbent and non-absorbent substrates are
suitable. Except PE, PP, PTFE, acrylic glass,
plasticized PVC, copper and brass. With coated
substrates, a check of product suitability or
professional advice is recommended. Wet surfaces
are possible if it has the possibility to dry. Not
recommended for permanent water immersion.
Seam seals in metallic and wooden construction (no
movement) seam seals in ventilation &
air-conditioning ductwork (no movement).
Gluing of natural stones (e.g. windowsill –seat made
from marble, granite) is possible, if the natural stone
has a thickness of min. 10 mm.
*Pre-test to determine suitable bonding, because of many different
substrates. The adhesion of PL 200 on polystyrene foam (Styrofoam)
can be significantly improved, by precoat with diluted wood glue. Mix
wood glue about 1 : 1 with water and spread onto the substrate. After
drying of the precoat, PL200 are ready to apply.
**Use mirrors acc. DIN EN 1036-1, ask for technical advice for
large-scale objects.
APPLICATION
Cut off tip of the cartridge above the screw thread.
Screw on plastic nozzle and cut off the tip of the
nozzle. Place cartridge into gun. Apply adhesive
onto one of the surfaces. Ensure surface to be
bonded are free of dust, grease or oil and not in
permanent contact with water. Substrates must be
stable.
Curing of adhesive requires the intake of a small
amount of moisture (either from the atmosphere or
substrate). In case of two non-absorbent surfaces,
make sure that adhesive tracks do not merge as
contact with air is necessary for adhesive setting.
Press together glued surfaces while glue is still
humid – approx. 15 min. Heavy items and items
under tension have to be supported and fixed for at
least 24 hours.
Remove residues immediately with a cloth soaked
with acetone.
In cases of unknown materials or critical
applications adhesions tests are recommended or
contact our Technical Service’
Reviews
There are no reviews yet.