Denso Tape 2″*10MM

Conformable, cold-applied fabric tape for the corrosion protection of pipes
Composition
Durable synthetic fibre fabric impregnated and
coated with a petrolatum compound.
Uses
Denso Tape is used for the corrosion protection of
buried or exposed pipes, valves, and fittings.
Service temperature: -20°C to +55°C
Characteristics
Denso Tape is:
• resistant to water, water vapour and gases,
• resistant to mineral acids, alkali and salts,
• non-hardening, non-cracking, and
• conformable over a wide temperature range
Surface Preparation
See Instructions for Use for additional detail.
Surfaces must be clean and dry. Remove all loose,
rust, scale and flaking coatings by scraping, wire
brushing or blast cleaning.
Apply Denso Paste or Denso Priming Solution.
Application
See Instructions for Use for additional detail.
Place the outer surface of the tape roll on the pipe.
Wrap spirally around the pipe, taking care to
overlap each layer by at least 55%. Smooth the
compound with a gloved hand.
Application temperature: -5°C to +45°C
Availability
Denso Tape is available in 10 metre rolls in widths
from 50 mm to 300 mm.
Storage conditions
Store in a cool and dry place in original packaging.
Waste material
Please avoid or minimise waste wherever possible.
Please do not discard waste material, including
packaging, in the surrounding environment. Follow
all relevant legislation for disposal.