Pattex Contact Adhesive 650 ML

DESCRIPTION
PATTEX CONTACT ADHESIVE PREMIUM
Pattex Contact Adhesive Premium is a premium
quality, high tack, toluene free, polychloroprenebased, multipurpose contact adhesive.

BENEFITS
• Indoor & outdoor use
• Suitable for a large variety of materials
• High bonding strength
• High Temperature resistance from -40°C to +110°C
• Chemical resistant
• Toluene free

SCOPE OF USE
• Recommended for bonding various materials; light
wood, heavy wood, protection boards, cork, PVC,
etc. It can also be used to bond all types of fibrous
insulation material to G.I, aluminium sheets and to
other metals.
• Due to the high temperature resistance, UV-stability and bonding strength it can also be used for
the bonding of protection boards and soundproofing panels (bituminous, rubber, PVC, etc.) to
numerous substrates such as PVC, EPDM, HDPE,
bituminous membranes, etc.

APPLICATION
Surface preparation
Surfaces should be levelled, dry, clean of dust and
free of substances which may impair adhesion.
Packaging type
Can
Size
250ml
IDH
2120674
1700711 Can 650ml
1966743 Can 2.5L
1700698 Can 3L
DARE TO DO
SCOPE OF USE
• Recommended for bonding various materials; light
wood, heavy wood, protection boards, cork, PVC,
etc. It can also be used to bond all types of fibrous
insulation material to G.I, aluminium sheets and to
other metals.
• Due to the high temperature resistance, UV-stability and bonding strength it can also be used for
the bonding of protection boards and soundproofing panels (bituminous, rubber, PVC, etc.) to
numerous substrates such as PVC, EPDM, HDPE,
bituminous membranes, etc.
PACKAGING INFORMATION
BENEFITS
• Indoor & outdoor use
• Suitable for a large variety of materials
• High bonding strength
• High Temperature resistance from -40°C to +110°C
• Chemical resistant
• Toluene free
Application procedure
Apply a thin layer of Contact Adhesive (Standard) on
both surfaces by brush. Wait 10 to 15 minutes for the
solvent to evaporate from the adhesive. Bring
together, and strongly press the two surfaces for a
short period of time. A successful adhesion depends
on the strength and not on the time span of the
applied pressure. Such as executed bond is long
lasting and resistant to water, heat, cold and acids.
Product should be allowed to develop full strength
before subjecting to any service loads (typically 60
minutes).
Cleaning
Clean adhesive residue and tools with carbon-solvent
only