Loctite 222 Low-strength Threadlocker Adhesive 50ML

LOCTITE®
222 is designed for the locking and sealing of
threaded fasteners which require easy disassembly with
standard hand toolsThe product cures when confined in the
absence of air between close fitting metal surfaces and
prevents loosening and leakage from shock and vibration
Particularly suitable for applications such as adjustment of
set screws, small diameter or long engagement length
fasteners, where easy disassembly is required without shearing
the screwThe thixotropic nature of LOCTITE®
222 reduces the
migration of liquid product after application to the substrate
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.05
Flash Point – See SDS
Viscosity, Brookfield – RVT, 25 °C, mPa·s (cP):
Spindle 3, speed 2.5 rpm ≥3,500
Spindle 3, speed 20 rpm 900 to 1,500
Viscosity, EN 12092 – MV, 25 °C, after 180 s, mPa·s (cP):
Shear rate 277 s
-1 135
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate usedThe graph
below shows the breakaway strength developed with time on
M10 steel nuts and bolts compared to different materials and
tested according to ISO 10964