Callington Spatter Guard 400ML

DESCRIPTION
Callington S-Weld Spatter Guard is a paintable, cost-effective and non-flammable
agent for the prevention of weld-spatter adhering to metal surfaces during the welding
process.
S-Weld Spatter Guard avoids the need for mechanical abrasion or grinding of weld
spatter following welding. It contains corrosion inhibitors for base metal protection.
S-Weld Spatter Guard increases the life cycle of torch components saving time and
money. Eliminates spatter build-up which results in poor gas flow causing pitting and
porosity.
S-Weld Spatter Guard is suitable for a wide range of steels, including mild steel,
stainless, steels, aluminium and high-performance alloys.
FEATURES & BENEFITS
• Protection for interior and exterior of MIG nozzles & Electrode welding
• Uniform spray with no air bubbles
• Non-flammable, making it workshop safe
• Provides base metal protection and can be used in all areas.
• Contains no silicones which enables no painting or powder coating problems
DIRECTIONS FOR USE
Spray onto the area to be treated, in a thin and uniform film, holding the nozzle approximately 30cm
from the surface. NOTE: Wipe surface with a clean cloth to remove S-Weld Spatter Guard anti-spatter
spray prior to painting.
APPLICATION FOR WELDING TORCH
Spray S-Weld Spatter-Guard before welding in a thin and uniform film onto the areas to be
protected. Hold spray can approximately 30cm from the surface to be protected. Also use the
spray to protect the interior and exterior of nozzles, the end and outer surface of contact tips, and
all other potential areas which are subject to weld spatter. It may be advisable to spray diffusers
and the base of the nozzle support as well.
APPLICATION FOR BASE METAL
Spray S-Weld Spatter-Guard hold spray can approximately 30cm from surface to be protected.
Spray a thin uniform coating.